![background image](http://html1.mh-extra.com/html/zodiac/milpro-erb-380/milpro-erb-380_manual_936174008.webp)
8 / 14
INFLATING THE BOAT USING FOOT OR HAND INFLATION PUMP
Illustration in Appendix of page A-6
NOTICE
Do not inflate boats that are piled up on one another.
•
Activate all the valves in the inflation position.
•
Attach the pump hose tip to the valve on the
buoyancy tube.
•
Inflate of the buoyancy, while balancing the
pressure between different compartments until
the bulkheads (a) are no longer visible
(pressure = 240 mb).
NEVER PUT A
COMPARTMENT UNDER
PRESSURE WHILE THE
OTHERS ARE STILL
FULLY DEFLATED
a
1
2
INFLATING THE BUOYANCY TUBE
•
Inflate the buoyancy tube up to operating pressure.
•
Screw the caps after inflation (See appendix on page A6).
•
Shut off the valves in "navigation" position.
INFLATING THE H2P FLOOR
•
Inflate the H2P floor, after having placed the buoyancy tube in the above configuration.
•
Screw the cap after inflation (See appendix on page A6).
NOTICE
A slight loss of air is normal before the cap is screwed on. Only the cap
ensures complete air tightness.
INFLATING THE KEEL
•
Inflate the keel after having inflated the buoyancy tube and the floor up to operating
pressure.
•
Screw the cap after inflation (See appendix on page A6).
100 %
0 %
0 %
50 %
50 %
50 %
100 %
100 %
100 %