Assemble the boat on a smooth clean surface.
IF THE BOAT IS STORE
UNFOLDING, LET
TEMPERATURE, 20°C.
ASSEMBLING THE HIGH PRESSURE
•
Place the deflated
floor at the bottom
of the boat; and
make sure the
deflated floor is
correctly placed in
the corner
reinforcements.
•
Tighten the
buoyancy tube /
floor and
transom/floor
fixation buckles.
Lace the high
pressure floor to the
fabric flap at the bow
5/16
BOAT ASSEMBLY
Assemble the boat on a smooth clean surface.
IF THE BOAT IS STORED AT A TEMPERATURE BELOW 0°C, BEFORE
UNFOLDING, LET IT WARM UP FOR 12 HOURS AT ROOM
TEMPERATURE, 20°C.
THE HIGH PRESSURE FLOOR
Securing the floor to the
transom:
Slide the after line into the
batten’s groove.
ELOW 0°C, BEFORE
URS AT ROOM
Securing the floor to the
Slide the after line into the