Zodiac JXI200N, Рабочая тетрадь

Страница: 11 / 26

Power Interface
Board (PIB)
J12
J15
J16
J17
J 6
J 3
J10
Air/Coil
J 9
H2O
C
O
N
FIG
0
1
2
3
4
ON
FIL- PMP AUX 1
AUX 2 AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 SLR-PMP E-HTR INTAKE RETURN CLEANER SOLAR
AUTO
SERVICE
TIME OUT
RESET
HEATER SOLAR
POOL MODE
SPA MODE
SPA DRAIN
SPA FILL
SPARE
ON
4 3 2 1
RE
D
BL
AC
K
YE
LLO
W
G
R
EEN
Connection to Controls
Connection to Jandy Control - RS 485
J Xi CONNECTED TO AQUALINK RS AT RS 485 LINE
There are two ways of connecting a Jandy
J
Xi heater to the AquaLink RS. One way is to connect at the Pool
and Common terminals of the Power Interface Board. This type of connection is shown on the next page. The
other way is to connect to the RS 485 line (red terminal bar) as shown here. When connected at the RS 485
line, the
J
Xi and AquaLink RS become “smart” in that the control knows if the heater is malfunctioning.
When
connecting to the RS 485 line, the AquaLink RS firmware must be Rev N or newer.
To establish communication between the LXi and AquaLink RS do either of the following:
After making connection turn power off then on to the AquaLink RS.
Hold the MENU button down for 5 seconds, then simply follow the screen prompts.
11