8
3.4 I Electricity supply connections
To prevent all risks of electrocution, fire or serious injury, please comply with the following
instructions:
•
Use of an electrical extension is prohibited when connecting the control box.
•
Make sure that the socket can be easily accessed at all times and is protected from rain or
splashes.
•
The control box is splash-proof, but must not be immersed in the water or any other liquid.
It must not be installed in a floodable area; keep it at least 3.5 metres away from the edge of
the pool and avoid exposing it to direct sunlight.
•
Place the control box near the socket.
•
Unscrew the protective cap (see figure ).
•
Connect the floating cable to the control box and lock it in place by turning the ring only in the clockwise direction (to
prevent damage to the floating cable) (seefigure
,
)
.
•
Make sure that the connector is fully pushed in so that no water can get in (see figure )
.
• Connect the power cord
(see figure ). Only connect the control box to a power outlet protected by a 30 mA
maximum residual current device
(if in doubt contact a qualified technician).
Tip: positioning the unit for better operation
Place the control box halfway along the length of the pool, in accordance with the safety conditions relating
to the electrical connection.
