9
2.2 I Installing the station and charging the cleaner
• The station must not be immersed in water or any other liquid. It must not be installed in a floodable
area.
• DO NOT place charging station in direct sunlight.
•
Place the charging station:
-
Close to an easily accessible power outlet (located out of the rain and from splashing),
-
in the shade.
DO NOT expose cleaner and base to direct sunlight when charging cleaner.
-
more than 3.5 metres from the edge of the pool.
3.5 m
and over
Less than
3.5 m
•
Connect the charging station.
•
Position the cleaner on the charging station so that the rear of the cleaner (the cursor end) come into contact with
the slots provided on the rear of the station. When the cleaner is correctly positioned, an
audible signal
is heard and
the indicator
blinks slowly (orange).
• Temperature range for charging : 5 - 35°C.
• Make sure that the charge plates on the charging station and on the cleaner are clean and dry before
charging.
• Do not touch the charge plates on the charging station or on the cleaner right after recharging the
cleaner.
Bip
Handle
Slot
Cursor
•
Before using the cleaner for the first time, charge it fully: The indicator
changes to steady (green) once it is fully
charged.
Charging stops automatically as soon as the cleaner is fully charged. Therefore there is no need to discon-
nect the station or to remove the cleaner.
•
When all of the indicators are off, the cleaner is on standby. Slide the cursor to the left or to the right to
wake up the cleaner. If this does not work, place the cleaner back on the charging station (the cleaner goes
into deep sleep after 8 days of inactivity).
•
If the indicator
does not blink when the cleaner is first placed on charge, see "5.1 I Appliance
behaviour".
•
To get the advantages of connectivity (software updates, battery status, information on the cycle, see
"3.2 I Functions available in the iAqualink™ app"), place the charging station in a location where Wi-Fi is
accessible.
EN