Zodiac FloPro VS, Инструкция по установке и эксплуатации

Страница: 8 / 23

6
❷ Installati on
2.1 I Selecti ng the locati on
• The pump must be installed:
- before the fi lter, a heati ng and/or water treatment system,
- at a minimum distance of 3.5 metres from the edge of the pool, to avoid any water being sprayed onto the
appliance. Some standards allow for other distances. Refer to the regulati ons in eff ect in the country of installati on.
- ideally 30 cm below the water level,
- outside areas liable to fl ooding, or on a base with drainage,
- in a venti lated area to allow the pump and motor to cool.
• The pump must not be installed:
- in an area subjected to splashing, rain or exposed to direct sunlight.
- more than 3 m above the water level.
- near a heat source or source of fl ammable gas.
- in an area that cannot be cleaned or kept free of leaves, dry foliage, and other potenti ally fl ammable items
• Easy access is required for maintenance work on the appliance.
• Place on a stable, level and solid surface (e.g. concrete fl oor).
• If necessary, use the bases provided (1 thin + spacers, 1 thick, use only one or both together) to raise the pump to the
level of the existi ng pipework.
• Anchor the pump (and the base(s) where applicable) to the ground using suitable foundati on bolts.
Bases and dividers