Zodiac FLOPRO SS, Инструкция по установке и эксплуатации

Страница: 10 / 11

18 19 ZODIAC FloPro ssPump installation & Operation Manual
W70913 WET END IMPELLER ASSY 1.1KW 1 7
W70914 DIFFUSER, PUMP, WFHPM 1 8
W70915 PUMP BACKPLATE 1 2
W70916 PUMP FOOT MOTOR 1 3
W70917 PUMP SLEEVE 1 28
W70918 PUMP ASSY. BODY FLOPRO 1 4
W70919 WET END BACKPLATE O'RING 1 24
W70920 WET END DIFFUSER O'RING 1 23
W70921A PUMP SEAL MECHANICAL (SPRING LOADED DRIVE BAND ASSY) 1 5
W70921B PUMP SEAL MECHANICAL (SEAT/MATTING RING) 1 6
W70922 WET END SCREW, MOTOR TO BACKPLATE 4 14
W70923 WET END SCREW, BACKPLATE TO PUMP 6 16
W70924 PUMP WASHER, 3/8, SS SERIES N, TYPE B, ANSI B18.2.1 10 15
W70925 WET END DIFFUSER SCREW 1 17
W70926 WET END UNION ASSEMBLY 2 1, 21, 22
W041321 REDUCING BUSH-GREY 2
7.2 Performance curves
Zodiac FloPro ssPump - Head vs Flow Rate
7.3. Physical and Operational Specifications
Figure 9. FloPro ssPump Dimensions (without Base or Spacers)
Zodiac FLOPRO Single Speed
Pump Specs
0.6kW 0.75kW 1.1kW
Model FLOPRO 0.6kW FLOPRO 0.75kW FLOPRO 1.1kW
Motor -Type Single Phase Single Phase Single Phase
Pump -kW 0.6kW / 0.75HP 0.75kW / 1.0HP 1.1kW / 1.5HP
Motor -kW 0.8kW 1.0kW 1.4kW
Motor -Voltage (Alternating Current)
and Frequency (Hertz)
V230 AC
Hz50
V230 AC
Hz50
V230 AC
Hz50
Motor -Amps Maximum Amax 3.6A 4.6A 6.2A
Motor -Revolutions Per Minute RPM 2820 2820 2820
Motor -Capacitor 16
µ
F (450V) 20
µ
F (450V) 30
µ
F (450V)
Insulation Class F F F
International Protection Marking IP44 IP44 IP44
Motor -Frame Size 80 80 80
Overload Protection
130°C -
Autoreset
130°C -
Autoreset
130°C -
Autoreset
Motor -Bearing Drive end 6204 DDU 6204 DDU 6204 DDU
Motor -Bearing Non Drive end 6204 DDU 6204 DDU 6204 DDU
Water Temperature Max. 35°C 35°C 35°C
Flow -Litre per minute Q(L/min) 285-205 L/min 340-240 L/min 390-260 L/min
Flow -Litre per minute Maximum Qmax 290 L/min 350 L/min 400 L/min
Head -Metres H(m) 1-12m 1-14m 1-16m
Head -Maximum Hmax 15m 17m 20m
Flow Rate Q (L/m)
H
ea
d
H
(m)
Zodiac
FloPro 1.1kW
Zodiac
FloPro 0,75kW
Zodiac
FloPro 0.6kW