25
•
Press
(see number of required presses in the following table) to access the desired function.
Number
of
presses
Screen display
Function
Additional information
0
•
Shows the appliance model
•
Displaying and resetting the
number of operating hours of the
cell or the pH pump
•
See § «4.3.2. Appliance information»“
•
See § «4.3.3. Displaying and resetting the
number of operating hours of the cell or
the pH pump»“
1
Shows the software version in use
•
See § «4.3.2. Appliance information»“
2
reverse direct
Polarity reversal cycles adjustment
See § “4.3.4. “Reverse direct”: Reversal
adjustment for cell cleaning”
3
flow
Activation of the flow switch
See § “4.3.5. “Flow”: Activating the flow
switch”
4
flow cell
Activation of the gas sensor
See § “4.3.6. “Flow cell”: Activating the gas
sensor”
5
cover
Activation of "Pool cover" mode
§ “4.3.7. “Cover”: Connecting a pool cover”
6
pH intelligent
Activation of "Intelligent pH" mode
§ “4.3.8. “Intelligent pH” mode”
7
i n i pH
Activation of the “Initialisation”
mode for pH regulation
§ “4.3.9. “Ini pH”: Initialisation of pH
regulation”
8
pump
stop
Setting the pH pump over feed
alarm triggering
§ “4.3.10. “Pump stop”: pH pump stop over
feed alarm (pH - PH/ORP models)”
9
auto
Cl mV
Activation of the automatic ORP
regulation
§ “4.3.11. “Auto Cl mV”: Automatic ORP
regulation (pH/ORP models)”
10
Cl EXT
Activation of Slave mode
§ “4.3.12. “Cl EXT”: Slave mode”
11
Setting the "Temperature"
alarm
triggering
§ “4.3.10. “Pump stop”: pH pump stop over
feed alarm (pH - PH/ORP models)”
12
Setting the "Salinity"
alarm
triggering
§ “4.3.14. Setting the “Salinity” alarm
triggering
”
13
Activation of the user interface
power saving mode
§ “4.3.15. User interface energy saving
mode”
14
b i o
Activation of "Bio pool" mode for
natural pools
§ “4.3.16. “Bio”: “Bio pool” mode for natural
pools”
Settings
N/A
N/A
Calibrating the temperature
See § “4.3.17. Calibrating the temperature”
N/A
N/A
Calibrating the salt concentration
See § “4.3.18. Calibrating the salt
concentration”
