Page 7
Page 6
EL Series Saltwater Chlorinator | Installation Manual
Section 2. System Overview
2.1 Contents
Before starting, check that you have the correct
parts as indicated in Table 1. If any parts are
missing or incorrect, please call your local distributor
or technical support at 1300 763 021 for assistance.
2.1.1
Salt Chlorinator System
EL25/EL35 Saltwater Chlorinator
a. Controller
b. Wall Mount Bracket
c. Wall Mount Screws Ø7 mm (X2)
d. Wall Mount Anchor (X2)
e. Electrolytic Cell
f. Unions (X2)
g. 50mm Glue on Adapter (X2)
h. 50mm - 40mm Reducing Bush (X2)
i. O-ring (X2)
Table 1. Salt Chlorinator System Contents
2.2 Specifications
2.2.1
Salt Chlorinator System
EL 25
EL 35
Nominal chlorine production
25 g/h
35 g/h
Nominal output amps
4.4 A
5.8 A
Required salt level
6000ppm
Power supply voltage
230 - 240 VAC
Protection index
IP23
Flow through the cell
Min. 80 Lpm
Operating water temperature
10°C - 40°C
Table 2. Salt Chlorinator System Specifications
2.3 Dimensions
2.3.1
Controller
22.54 cm
13.15 cm
32.3 cm
Figure 1. Controller Dimensions
2.3.2
Cell
32 cm
11.5 cm
21.5 cm
11 cm
21.5 cm
15.5 cm
Figure 2. Electrolytic Cell Dimensions
2.4 Materials and Tools
2.4.1
Controller
Tools Needed for Installation
• Power Drill
• 7 mm Drill Bit - Hammer Drill Bit
(only necessary to drill into brick or concrete)
• Pencil or Marking Pen
• Pozidriv Screwdriver
2.4.2
Cell
Tools Needed for Installation
• PVC Cutter
• PVC Cement
• Pencil or Marking Pen
• Check Valve
• 50 mm PVC Pipe (40mm optional)
