25
B ) M A N U A L O P E R A T I O N
In this mode your robot will move in the direction you indicate by using
the control buttons on the control box.
- Set the manual
/ automatic
” mode button on the control box
to manual
mode (fig. 1).
- Set the "On (
I
) /Off (
0
)" rocker switch to On (
I
) (fig. 2).
- Press the "Start
” button to start the appliance (fig. 3).
- To make the robot move forward
or back
use the 3 position switch
"Forward, Stop, Back" (fig. 4).
IMPORTANT: the robot will not move if this switch is in the central position (STOP).
.
- To change the direction of the robot, use the button controlling the rotation
,
while the robot is moving forward or back (fig. 5).
- You can change to automatic mode at any time by setting the switch to automatic
mode. The robot will start performing the pre-set program as if it had been started
up in automatic mode.
- After use, set the "On (
I
)/Off (
0
)" switch to Off (
0
) (fig. 6) and disconnect the supply
lead from the mains.
IMPORTANT: Wait for about 1/4 hour before taking the robot out of the water.
..
24
2. Starting up
You can choose whether to operate your CYBERNAUT™ in automatic or manual mode.
Whichever mode you choose the robot will operate for a period
of time pre-set in the factory:
- 1 and a half hours for models fitted with a 16 m cable;
- 3 hours for models fitted with a 25 m cable.
A ) A U T O M A T I C O P E R A T I O N
In this mode your robot will perform a sequence of movements which
have been programmed in the factory to meet the requirements of most pools.
If this configuration does not suit the size or shape of your pool,
contact your retailer so that he can select the most suitable program for your pool.
- Set the rocker switch "manual
/automatic mode
” " on the control box
to "automatic
” (fig. 1).
- Set the "On (
I
)/Off (
0
)" rocker switch to On (
I
) (fig. 2).
- Press the "Start
“ button to start the appliance (fig. 3).
- You can change to manual control of the robot's movement at any
time by setting the switch to manual mode.
- When the programme has been completed, the robot stops.
Set the "On (
I
)/Off (
0
)"switch to Off (
0
) and disconnect the supply
lead from the mains (fig. 4).
IMPORTANT: Wait for about 1/4 hour before taking the robot out of the water.
..
AUTO
M
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
AUTO
M
fig. 1
fig. 2
fig. 3
fig. 4