How Much Salt to Add
Regular use of sodium hypochlorite (liquid chlorine) creates residual salt within the pool and may bring
the salt level close to the required 4000 ppm concentration.
Generally, in a pool of approximately 13,200 gallons, one (1) 50 lb. bag of salt will increase the salt
concentration by 500 ppm. In a new pool (where there is no salt residual) of approximately 13,200
gallons, eight (8) 50 lb bags of salt are required to reach a 4000 ppm concentration. For the exact
requirements, refer to the chart below.
Salt Requirements
Pounds and (KG) of salt needed to raise level to 4000 PPM
How to Add Salt
Only 99.5% pure refined salt (sodium chloride) should be used with the Clearwater chlorinator. Avoid
using salt containing YPS (yellow prussate of soda).
•
Disperse salt evenly around the perimeter of the pool and brush to spread. Do not add salt
to skimmer.
•
Run filter for 4-6 hours.
•
Allow 24 hours for salt to fully dissolve. If the CHECK SALT light is on after 24 hours, test salt level
and add necessary salt to obtain a 4000 ppm concentration.
•
Wait 4 weeks before adding salt to new palster pools.
14
