8
FOR CORNER OR END INSTALLATIONS
If your skimmer or wall vacuum fitting is located at the corner or end of your pool,
use enough hose sections to reach the farthest point in the pool, plus one (1) section.
FOR CENTER INSTALLATIONS
If your skimmer or wall vacuum fitting is located at the center of your pool,
use enough hose sections to reach the farthest point in the pool, plus two (2) sections.
Note: You may not use all or you may need more hose sections,
with either installation method, depending upon your pool size.
HOSE ASSEMBLY
SKIMMER / WALL
VACUUM FITTING
SKIMMER / WALL
VACUUM
FITTING
SKIMMER / WALL
VACUUM FITTING
SKIMMER / WALL
VACUUM FITTING
BALANCE
Your Baracuda
®
G3
™
came with a hose weight, which will compensate for the buoyancy of the hose. A
properly balanced hose will create a 45-degree angle from the cleaner head and the bottom of the pool.
Slide the hose weight on the female end of the first section of hose and position it half way up from the
cleaner head. See Adjustments (page 13) for additional information.
