17
TROUBLESHOOTING
PROBLEM
SOLUTION
Baracuda
®
G3
™
stops & starts
Check diaphragm for blockage or damage. Adjust worn
diaphragm by loosening cassette swivel, gently
pushing down on inner pipe & retightening cassette
swivel.
Baracuda G3 is patterning
Add return diverters or divert return inlets downward.
Lay hose in a straight line in the sun to relax memory.
Confirm proper hose length - add 1 to 2 hose sections.
Baracuda G3 isn't covering
Add return diverters or divert return inlets downward.
opposite end of pool
Use flow to move cleaner to opposite end. Move hose
weight away from cleaner head slightly. In deep pools
add additional weight.
Baracuda G3 stuck at steps
Utilize return flow (see adjustments). Confirm proper
hose length. Adjust flow to cleaner. Adjust hose weight.
Baracuda G3 stuck under ladder
Install ladder guard (PN 24000).
Baracuda G3 flips over
Contact tech services for local warranty station.
Baracuda G3 won't climb walls
Cleaner may not climb walls of some vinyl pools. Use
Pool Pulse
™
and raise flow. Confirm proper hose length.
Adjust hose weight.
Baracuda G3 doesn't move
Use Pool Pulse
™
to insure proper flow. Clean baskets &
filter. Check diaphragm for damage. Check hose
sections for leaks by lifting each section above water.
Baracuda G3 won't leave edge
Use Pool Pulse
™
to lower flow. Utilize return flow to
or rim of pool
move cleaner. Adjust hose weight.
Solar blanket installation
Coverage will be limited due to blanket.
Note: In cold water of 60˚ or less, water flow through the Baracuda G3 must be increased to
compensate for the reduced flexibility of the hose and diaphragm.
IF ASSISTANCE IS REQUIRED, CALL 1-888-786-7797