![background image](http://html1.mh-extra.com/html/zodiac/b3/b3_owners-manual_4010944009.webp)
E
n
g
lis
h
9
9
Operation and Maintenance
To reinstall the diaphragm:
1. Attach diaphragm to inner extension tube (see Figure 8).
2. Insert inner pipe and diaphragm into cup assembly. Align
diaphragm tabs with notches and pull straight through
(do not twist) until the edge of the diaphragm is visible
(see Figures 9 and 10).
3. Thread the outer extension tube onto the cup assembly and
tighten (see Figure 11).
4. Verify the thrust washer is still in place inside the handnut.
Insert the engine into cleaner body, slide the handnut over
the engine extension tube and tighten (see Figure 12).
5. Make sure the extension tube swivels freely by spinning it
(see Figure 13).
Storage and Winterizing
Never coil the hose. Store the B3 cleaner out of direct sunlight.
When storing for the winter, drain all water from the cleaner.
Remove all connectors and adapters from the dedicated
suction line or skimmer. Store the disc flat, and hose sections
disconnected, drained and straight.