Zodiac AquaSphere ASR 105, Инструкция по установке и эксплуатации

Страница: 15 / 16

13
4.2. User alerts
The status indicator on the control box flashes to alert the user. Follow the recommended troubleshooting tips below.
LED (Start)
Solutions
• Disconnect and reconnect the cleaner.
• Check that the cable is properly connected to the control box.
• Check that nothing is interfering with the cable connection area.
• If this fails to solve the problem, contact your retailer for a full diagnosis.
• Check that debris or the cable is not preventing the brush or the tracks
from rotating freely.
• Check that nothing is interfering with the cable connection area.
• Rotate each wheel by a quarter of a turn in the same direction until it
rotates smoothly
• If this fails to solve the problem, contact your retailer for a full diagnosis.
• Turn the cleaner off.
• Clean the filter thoroughly.
• Put it back in the water, shaking to release the air bubbles.
• Restart the cycle.
• If this fails to solve the problem, please contact your retailer for a full
diagnosis.
• Check that no debris or hair is blocking the impeller.
• Clean the filter thoroughly.
• If this fails to solve the problem, contact your retailer for a full diagnosis.
If the problem persists, contact your retailer:
Deleting an error code
• After following the troubleshooting solutions, press a key on the control box to delete the error code.
EN