3
3. Control box diagnosis
(delivered with the cleaner)
-
Connect the control box's power cable.
•
On the control box, press
and hold for 10 seconds.
•
Quick mode (fl oor only) fl ashes by default
. For control boxes with a screen, the
message "diAG" is displayed
at the same ti me.
•
Press and release
, Smart mode (fl oor, walls, water line) starts to fl ash
. For control boxes with a
screen, the
message "diAG" is displayed at the same ti me.
•
Press
to start
manual diagnosti cs of the control box
, in 2 steps:
1. LED test:
all LEDs should be fl ashing.
==> This is used to detect whether an LED is defecti ve; replace the control box where necessary.
2. Butt on test:
press and release the butt ons shown below. All LEDs should be steadily lit for 2 seconds
. For control boxes
with a screen, the
message "GOOD" is displayed at the same ti me.
==> This is used to detect whether a butt on is defecti ve; replace the control box where necessary.
Example of a control box with the butt ons to be tested (butt ons may diff er depending on the model)
•
To exit diagnosti cs mode, press
.
All Alpha™ iQ control boxes can be used to perform Cleaner Diagnosti cs for any Alpha™ iQ model.
