Zodiac Pool Systems AQUAPURE Ei, Техническое учебное пособие

Страница: 9 / 28

9
Only needed if
pipe is 1½ inch
And here
And here
Drill holes with the hole saw
provided.
Caution: Be careful not to drill
through other side of pipe.
Clamp two halves together.
Insert Cell and tighten
lock nut.
Installation - Clamping to Pipe
Step 1: Dissasemle clamping system by
pressing on tabs.
Tabs
Step 2: Turn base over and place on top of pipe. Insert
marker through each hole in the base and mark the pipe.
Step 3: With hole saw provided drill through the top of the pipe
where marked.
Step 4: Snap the top and bottom together and use the tool provided
to tighten clamp.
Installation
8