Zodiac Pool Systems AQUAPURE Ei, Техническое учебное пособие

Страница: 13 / 28

13
2.5 amp fuses
Bl
k
Rd
Fan
OV PO
S
B A
100-265 VAC
On
On//OfOfff
Ou
Outtppuutt
FlFlooww SSalatlt
RR
2.5 amp fuses
Bl
k
Rd
Fan
OV PO
S
B A
100-265 VAC
R
On/Off Output
Flow Salt
2.5 amp fuses
Bl
k
Rd
Fan
OV PO
S
B A
100-265 VAC
Power Supply Wiring
Installation - Opening Power Pak
Step 1: Press on sides of Power Pak
cover as shown to release cover.
Step 2: Remove 4 screws as shown to
release electrical cover.
Installation - Wiring
Connect either 120 or 240 VAC to the Power Supply
terminals. System will auto-detect the voltage and
send the proper voltage to the circuitry.
R em ember to bond and ground the Power Pa c k.
Installation
11
Notes:
Blk Rd
Fan
OV POS B A
2.5 amp fuses 100-265 VAC
On
On/Off /Off
O Out utput put
Fl Flooww SSaalltt
RR
Indicates level of chlorine production.
Each light represents 20% production
If the Flow light is ON it
indicates there is no flow
through the Cell.
Check salt
level indicator
Production output setting.
Each press changes setting 20%.
When setting is above 20% the first LED will turn off.
Cycle time is 10 minutes. This means
set to 60% it will be on for 6 minutes
when the unit is
of every 10
minutes.
On or Off button
LED) is a The first LED on the left (amber
dual function LED. When the production is
set to 20% the amber LED will be on. When
thee a m ber
is detected
the production is set above 20%
LED will be off unless a problem
by the Ei.
Salt
• Ocean water – 35,000 to 36,000 ppm.
• Tear drop – 7,200 ppm.
• Ei – 3,500 to 4,000 ppm.
The purer the salt the better. Calcium & Magnesium are enemies of the cell.
Pure NaCl
• Minimum 98% pure food grade NaCl
• No added anti-caking agents.
• No sodium ferrocyanides (aka yellow prussiate of soda)
• Non-iodized
Ei Layout
12
Installation