- 5 -
number of the found transmitter memory cell will shortly appear (for example, "P02") and a short
fragment of broadcast will be playbacked.
To stop scanning the FM radio stations, press the button [ ] (9).
When scanning of FM radio stations is done, broadcast of the radio station found first ("P01")
will be playbacked.
3. By shortly pressing the button [
] (7) or [
] (10), choose any of the fixed stations in the
memory.
4. Adjust volume.
Connecting a microphone:
1. Turn off the device.
2. Turn the echo regulators
- ECHO +
(19), the main volume control
- MASTER VOL +
(12) and
the microphone volume control
- MIC VOL +
(20) to the minimum.
3. Insert the microphone plug into the appropriate socket (21) and/or (22).
IMPORTANT:
Move the dynamic microphone switch to the ON position.
4. Turn on the device by using the
ON•OFF
switch (1).
5. Speak into the microphone and set the desired volume by using the main volume control
- MASTER VOL +
(12) and
- MIC VOL +
(20).
INFO:
Use the echo regulator
- ECHO +
(19) to set the required level of echo.
Karaoke function:
To use the karaoke function, you must first connect the microphone, as described under
'Connecting a microphone' and insert a USB flash drive or memory card with pre-recorded music
(you can also use a mobile device with a Bluetooth connection or another external music player,
which is connected to the socket
AUX IN
(15), as a music source).
1. Turn on the device by using the
ON•OFF
switch (1).
2. Press
[Mode]
button (11) to select the MP3 music source (USB/TF-BLUE-LINE-Radio).
3. Adjust the volume level of music and microphone with
- MASTER VOL +
(12) and
- MIC VOL
+
(14).
When using Bluetooth (bLUE) or LINE mode, also adjust volume on your mobile device or
external player.
Lighting effects:
Some elements and speakers of the device can be illuminated with multicolour LEDs.
Switch these light effects on/off by pressing button [Light] (8).
Choose mode of the light effects by pressing any of the six keys (5).
PROVISIONS FOR PROPER USE
This is a complex device and it must be treated carefully. For device to serve for a long time and
trustworthy, please take into consideration the following:
1. Do not place the device in a very hot place (over 40˚C). In heat, electronic devices and
batteries damage faster and plastic details can even become deformed.
2. make sure the device is not in contact with water and any other liquids.
3. Do not draw the device near powerful sources of electric field and static electricity.
