- 4 -
INFO:
Not all smartphones have the NFC function.
2. Device pairing (for devices without the NFC function)
a. Make sure that the Bluetooth function is activated on your mobile device (e.g.
smartphone).
To do this, refer to your mobile device's manual.
b. Turn on the device by using the
ON•OFF
switch (1).
c. Press the
[Mode]
button (11). Turn on Bluetooth mode - the word "BT" will begin to flash
on the display.
REGULATOR is now attempting to connect to the device with which it was previously
paired. If REGULATOR finds the paired device, a signal will sound and the word "BT" will
stop flashing on the display. If the paired device is not found, REGULATOR is ready to be
paired with another device.
d. Find the Bluetooth menu on your mobile device and register the device on your mobile
device. To do this, refer to your mobile device's manual. Information should appear on your
mobile device’s display regarding the paired device (BT ID) with the name REGULATOR.
e. If password is requested, enter "0000" (or another depending on the model or software
version of you mobile device).
INFO:
Use the mobile device's controls to select the piece and play mode and set the start
volume (see the mobile device’s user manual). Adjust volume level with button
- MASTER
VOL +
(12)
3. Re-Connecting via Bluetooth
a. Activate the Bluetooth feature on your mobile device.
b. Turn on REGULATOR and select the mode "bLUE".
c. If your mobile was paired only with REGULATOR, the connection will be established
automatically. If your mobile device was paired with a number of other devices, connecting
to REGULATOR must be carried out manually.
NOTES:
• Depending on the playback device manufacturer, re-registration may be required
(PAIRING).
• If you experience any problems connecting to the device, deactivate WiFi and mobile data
features on your device.
• Bluetooth compatibility cannot be guaranteed for devices (e.g. mobile phones), which will
be produced in the future.
• To ensure optimum connection, make sure your device's battery is fully charged.
• Some mobile devices have a power-saving mode. Deactivate the power-saving mode, as
it may cause problems in the transmission of data in the Bluetooth mode.
Reception of FM radio stations:
1. If FM radio frequency numbers (e.g. "87.5") are displayed, it means that radio mode is on (if
name of another mode is displayed, turn the radio mode on by pressing button [
Mode
] (11)).
2. Press button [ ] (9) and hold pressed for 1 second, range scanning and registration of
radio station frequencies in the memory will start - the frequency on display will change and the
