- 3 -
Playing MP3 files:
1. Insert USB or microSD (TF Card) memory card containing MP3 recordings.
IMPORTANT:
For the proper functioning of the memory card, be sure to insert a memory
card or USB flash drive before switching on the device by using the
ON•OFF
switch (1)
ON
. Do not insert or remove the memory card or USB flash drive while the device is in
operation. Inserting or removing a memory card or USB flash drive while the device is in
operation may cause loss of information and/or damage the equipment!
IMPORTANT:
Put the microSD memory card in by holding it straight and with the golden
contacts upwards. Inserting a memory card the wrong way or at an angle may damage
contacts or cause the memory card to get stuck.
If the memory card is not inserted into the socket all the way until it clicks, data may not
be readable.
2. Turn on the device by using
ON•OFF
switch (1). MP3 playback will begin.
- If you have previously used another mode (''bLUE'', ''LINE'' or FM radio), press
[Mode]
(11) to
select the MP3 mode (in "USB/TF" ).
- Press [ ] (9) if you wish to turn on the Pause mode - playback will be stopped.
- If you press the button [ ] (9) again, playback will be resumed from where it was stopped.
- Selecting the next or previous track:
Briefly press [
] (10) to fast-forward.
Briefly press [
] (7) to fast-backward.
3. After listening to recordings, press [ ] (9).
4. Turn the device off by moving the main switch
ON•OFF
(1) to position
OFF
.
5. Remove memory card.
Playback of the analogue signal from external source:
1. Put in the cable plug found in the set in the round 3.5 mm jack
AUX IN
(15), put the other
cable plug in the source (for example, smartphone, tablet PC, MP3/MP4 player, etc.)
LINE OUT
or earphone jack.
2. Switch on the device and with the button [
Mode
] (11) choose the mode "LINE".
3. Adjust volume.
Bluetooth wireless connection:
NOTES:
• Bluetooth is a technology that uses radio waves to wirelessly connect devices located
within a close range of each other.
• Since there are many different manufacturers, models and software versions, complete
functionality cannot be guaranteed.
1.
Device pairing via NFC (for devices with the NFC function)
INFO:
Devices can be paired instantly by using the NFC function.
a. Turn on REGULATOR and select the "bLUE" mode.
b. Activate the NFC function on your mobile device.
c. Very slowly move the mobile device closely over the REGULATOR NFC symbol (
),
until you hear a signal and the mobile device receives a confirmation message.
