- 6 -
Karaoke function:
In order to use karaoke function, first connect microphones according to the description given in
the section "Connection of microphones".
1. Switch on the sound system by using the switch
POWER
(27).
2. Select the music source (BlueTooth/
/ /FM/Linein) by pressing the key [
MODE
].
3. Adjust volume of music and microphone by using the controllers
VOLUME
(21) and
M.VOL
(6).
When using "BlueTooth" or ''Linein'' mode, adjust volume also in the Bluetooth device or external
player.
Recording on a USB flash drive (or SD memory card)
You can record using a microphone MIC, FM radio, or linear input LINE IN.
Records are stored in the
JL_REC
folder.
MIC:
Insert a flash drive into a USB port (14) - the sound system will start the playback of records
from the USB automatically. Press and hold the [REC] button (10) - this will start the recording
process from a microphone. To end a recording session, press and release the [REC] button.
The recorded material is stored in the flash drive.
FM:
Insert a flash drive into a USB port (14). Enable the "FM" mode by pressing the [MODE] button.
Press and hold the [REC] button (10) - this will start the recording process from an FM radio. To
end a recording session, press and release the [REC] button. The recorded material is stored
in the flash drive.
LINE IN:
Insert a flash drive into a USB port (14). Insert the included RCA jacks into LINE IN ports of
the sound system. Insert a 3.5 mm cable jack into a port for headphones or linear input port on
a smartphone (or another device). Enable the ''Linein'' mode by pressing the [MODE] button.
Press and hold the [REC] button (10) - this will start the recording process from a smartphone.
Enable the recording mode on the smartphone. To end a recording session, press and release
the [REC] button. The recorded material is stored in the flash drive.
• If you have finished recording from a linear input and want to start recording from FM,
leave the USB in the port and press the [MODE] button to switch to "FM" mode.
• If you have finished recording from FM and want to start recording from FM, leave the
USB in the port and press the [MODE] button to switch to ''Linein'' mode.
• If you can`t record anything, check whether there is any free space on the flash drive
(memory card).
Playback of records
After you have finished recording, the last record will be played automatically. If you wish to play
other records, press the [
] button (15).
Remote control [REC] button recording playback functions
If the USB flash drive (or SD memory card) has recording made with the LIBERATOR as well
as other recordings:
press and release the [REC] button, and the sound system will play the last recording made
with the LIBERATOR, and then repeat it.
