- 2 -
- Multicoloured lights with rhythmic alteration.
- Option to power the device from the external 12V power source (for example, 12V car lighter
socket or battery) - by connecting the cables to +/- terminal in the block BATTERY 12V INPUT (26).
Control panels
PREPARATION
Battery charging:
Connect the included power cable to the port of the sound system ~220-240V 50/60Hz (29), blue
charging mode indicator
CHARGING
(25) will light up.
Battery should be charged for approximately 8 to 12 hours. When battery has fully charged, red
indicator
FULL
(24) will light up.
If the battery has run out of charge, switch off the sound system immediately (set the
POWER
(27) switch to
OFF
(
CHARGING
) and charge the battery of the sound system by
connecting it to the mains supply.
Low battery manifests itself through sound distortions and reduction in volume.
If the sound system is switched on during the charging (the
POWER
(27) switch is set to
ON/AC
), the battery charge time will be longer.
To extend the service life of the battery, never leave it uncharged.
If you will not use the sound system for a long time, charge the battery every 3 months.
