Zmotion XPCIE1028, Руководство пользователя

Страница: 22 / 55

XPCIE1028 Motion Control Card User Manual V1.0
Output method NPN Leakage type, it is 0V when outputs.
Frequency <500kHz <8kHz
Voltage level DC24V DC24V
Max Output Current +300mA +300mA
Max leakage current when off 25μA 25μA
Respond time to conduct 1 μ s(typical value of resistive
load)
12 μ s
Respond time to close 3 μ s 80 μ s
Overcurrent protection Support Support
Isolation capacitive isolation optoelectronic isolation
Note:
 The times in the form are typical based on the resistive load, and may change when the load
circuit changes.
 Due to the leak-type output, the shutdown of the output will be obviously affected by the external
load circuit, and the output frequency should not be set too high in the application. For low-
speed output, it is recommended to be lower than 8HKz. If there needs higher speed, please
contact us to adjust parameter or custom hardware.
→
Wiring Reference
→
Wiring Note
⚫
The wiring principle of high-speed digital output OUT(0-15) and low-speed digital