ECI2410 Network Motion Control Card Hardware Manual Version1.4
18
9
E5V
5V power generated from 24V, output
10
EGND
External power ground (not connect to switch power)
OUT0 and OUT1 are high-speed output, and they both have PWN function.
E5V power output is used to offer PWM, or it is used for common anode when
single-ended axis when expands. The power is not big, so it is not
recommended for other uses.
2.2.7
Handwheel Interface Signal
PIN
Name
Description
1
H-5V
Supply power only for handwheel (max 200mA)
2
HA-
Encoder A phase signal (IN36)
3
HB-
Encoder B phase signal (IN37)
4
HEMGN
Emergency stop signal (IN47)
5
NC
6
HX1
Select X1 ration (IN38)
7
HX10
Select X10 ration (IN39)
8
HX100
Select X100 ration (IN40)
9
HSU
Select axis 3 (IN44)
10
NC
11
EGND
External power ground
12
NC
