ZMARTFUN ZMF TAP N SET, Руководство пользователя

Страница: 14 / 16

7. TECHNICAL SPECIFICATIONS
x
When not in use, power should be turned off to maximize batteries
lifetime.
x
Requires 2 AA batteries. Use alkaline batteries only (recommended). Do
not mix old or rechargeable batteries with new ones. Do not use batteries
with a voltage higher than 1.5V like the Oxyride batteries; doing so might
permanently damage the circuitry in your unit.
x
Batteries should provide power for more than 400 hours of use under
normal conditions.
x
< 4 mA consumption.
x
Maximum Input Voltage: 3.5V
x
High display quality.
x
Operating temperature: -30 ºC to 80 ºC.
x
Chess clocks are intended for indoor and outdoor use.
8. TROUBLESHOOTING
Problem: The clock
won’t accept
programming from the
cellphone.
Solution: Make sure that your cellphone has NFC
capabilities and that the NFC option is on. When
programming the ZMF Tap N Set with a cellphone,
the phone will vibrate and the clock’s LED
indicators will momentarily blink to indicate that the
operation was successful. The location of the NFC
antenna in a cellphones can vary from one model to
another. The best way to find out where the antenna
is located is to try tapping the cellphone against the
clock using the bottom, middle, or top part of the
phone until it works.
Problem: I replaced the
batteries but the clock is
not working. The clock
was working before the
batteries replacement.
Solution: Make sure that the batteries are installed
in the proper polarity direction. There are some
marks in the batteries holder that indicate the proper
battery direction. Check the on/off slide switch.
14