Zlpower EX series, Руководство пользователя

Страница: 31 / 36

27
42 AC input fuse open circuit fault, (Fault
sign T6 light, Alarm beeps continually) Confirm if AC cable connect well, If
still can not solve, please contact
with manufacturer or dealer.
45 EEPROM data loss, (Fault sign T6 light,
Alarm beeps continually) Please contact with manufacturer
or dealer.
55 NTC fault, (Fault sign T6 light, Alarm
beeps continually) Please contact with manufacturer
or dealer.
57 Battery fault (Fault sign T6 light, Alarm
beeps continually and “BATT FAULT”
sign light) Please contact with manufacturer
or dealer.
59 Battery over charge fault (Fault sign T6
light, Alarm beeps continually and
“BATT FAULT” sign light) Please contact with manufacturer
or dealer.
60 UPS model illegal warning (Fault sign
T6 flash every 1s, Alarm beeps every
1s). Please contact with manufacturer
or dealer.
61 Board abnormal warning (Fault sign T6
flash every 1s, Alarm beeps every 1s). Please contact with manufacturer
or dealer.
62 ID repeat alarm (Fault sign T6 flash
every 1s, Alarm beeps every 1s). Please contact with manufacturer
or dealer.
63 Start abnormal warning (Fault sign T6
flash every 1s, Alarm beeps every 1s). Please contact with manufacturer
or dealer.
64 Charger abnormal warning (Fault sign
T6 flash every 1s, Alarm beeps every
1s). Please contact with manufacturer
or dealer.
65 Three phase lack of neutral wire, (Fault
sign T6 flash every 1s, Alarm beeps
every 1s, AC sign I/P LOW flash every
1s.) Please contact with manufacturer
or dealer.
4
、
Operate
4.1 Turn on/off UPS
Note: Although UPS inside batteries are already full charged when export,
but after transport and storage, it will lose some capacity. Thus suggest
user charge the batteries above 12hours before first use UPS, to ensure
enough backup time.
1. Start UPS connecting with AC main power:
1) UPS Connected to AC Main Power. UPS will work on