Zline RBIV-30, Руководство по установке

Страница: 6 / 44

RBIV-30 RBIV-36
INSTALLATION ENCLOSURE
You must follow the instructions below:
• The floor on which the product will be installed must be capable of bearing
1,200 pounds (544 kg) minimum.
• Kitchen floor and the bottom of the product must be at the same level. Otherwise,
the air flow for the cooling system may be impeded or reduced.
• There must be no objects preventing the installation of the product at the back
and on the side walls of the product's installation place.
• The electrical outlet receptacle must be at the correct place.
• Dimensions of the cabinets where the product will be installed must be in strict
conformity with the dimensions given in the manual.
• Do not install the refrigerator directly adjacent to another refrigerator. Otherwise,
condensation and damage as a result may occur. (Please see "Dual Cabin
Installation" for detailed information)
• Check if the floor where the product will be installed is level. Use a level.
• Installation area must not be subjected to direct sunlight and it must be away
from heat sources, ovens, radiators etc.
• The ambient temperature must be between 61°F (16°C) and 100°F (38°C).
Otherwise, function errors may arise when the product is running.
• If it is not possible to avoid installing the product near a heat source, the minimum
clearances given below must be maintained between the product and the said
source:
• 1 3/16" (3 cm) from electric hobs or ovens
• 12" (30 cm) from gas or fuel operated hobs or ovens
Please observe the following rules:
• The dedicated breaker must be easily accessible in case of an emergency; it must
not be hidden behind the product.
• Plug or cable must not touch the back surface of the product. Otherwise, it may
get damaged due to the vibration of the product.
• Do not connect the plugs of other appliances behind this product.
• If the humidity level is high where the product is used, corrosion may be seen on
the outer surface of the product. Keep the installation room dry and well-cleaned
to avoid corrosion.
To avoid the risk of electric shock:
• Connect the plug to a grounded electrical outlet receptacle.
• Do not remove the ground terminal of the plug.
• Do not use adapters.
• Do not use extension cables.
5
Pr
eparing th
e R
efriger
ator Enclosur
e
6
Pr
eparing th
e R
efriger
ator Enclosur
e
BEFORE INSTALLATION BEFORE INSTALLATION