Zline ISLAND, Инструкция по эксплуатации

Страница: 17 / 43

9
Please unpack your range hood when it is delivered and inspect to ensure all parts are
included.
1. Main Hood with All Lights and
Button Banks Pre-Installed
2. Chimney
3. Transition Piece (for 6” or 8”)
4. Baffle Filters
5. Packet of Screws and Anchors
6. Crown Molding Bracket
7. Crown Molding
8. Grease Cup
Screw: F
Screw: H/I
Screw: H
Screw: G
Screw: A/C/D
NOTE:
Island range hoods with single motors will come with a square to 6˝ round tran-
sition piece and will include a back draft damper. The ducting with these range hoods
is 6˝. Dual motor island hoods will come with a square to 8” round transition piece and
in some instances are fitted with a built-in damper. For existing installations that may
already have an external damper. Please consult an HVAC or installation professional
for advice to comply with local regulations.
Use solid ducting made of galvanized steel wherever possible. Try and minimize the use
of elbows. It is recommended to establish 15-20” of vertical airflow from the top of the
hood before executing a 90° turn or elbow. More elbows and longer runs create higher
static pressure. No more than two to three elbows is allowed. Use 40 feet of ductwork
max. The hood comes with a grounded three prong plug that can be plugged into a 15
amp circuit.
9
Designer Hood Installation
DESIGNER ISLAND HOOD INSTALLATION