Zline ISLAND, Инструкция по эксплуатации

Страница: 19 / 43

11
6. Slide chimney pieces over the angle iron on the hood. Pull the electrical plug to
the top of the chimney sections. Figure 4
7. Lift the hood to attach the angle iron to the ceiling bracket. Use screws provided
to attach.
8. Make your electrical and ducting connections. Use solid ducting made of
galvanized steel wherever possible.. Try and minimize the use of elbows. More
elbows and longer runs create higher static pressure. The hood comes with a
grounded three prong plug that can be plugged into a 15 amp circuit. The cord
is 36” long.
9. Slide top chimney piece up over the mounting bracket on the ceiling and secure
it in place with the provided screws. Figure 5
10. Install stainless steel baffle filters. Before installing baffle filters, make sure that
you insert the grease cup under the motor blower.
WARNING
With any of our wooden or copper range hoods, you can custom cut the
chimney to the desired height and the crown molding will hide any jagged
cuts and offer a seamless transition to the ceiling.
WARNING
The range hood is very heavy. Use the buddy system to keep the chimney
in place while screwing in the hood into the brackets.
Figure 4 Figure 5
2. Screw
Screw
1. Screw
11
Designer Island Hood Installation
DESIGNER ISLAND HOOD INSTALLATION