24
23
Dispenser
Faults
FAULT
• When there is a fault, the screen displays a fault code and the buzzer rings.
• Press any key when unlocking or locking and the alarm sound will stop.
• After the corresponding fault is eliminated by maintenance, the display will clear
the corresponding fault status code.
• When any door is opened for more than 2 minutes, the buzzer will sound. When
the door is locked/unlocked, press any key to clear the alarm sound or close all
doors and the alarm sound will stop.
Fault code Fault name
EH
The humidity sensor fails
F5
Refrigerating ice maker fails to turn over ice
F4
The sensor at the bottom of the refrigerating ice maker fails
CC
The defrosting sensor in ice making chamber fails
C9
The sensor in ice making chamber fails
CA
The communication between main control board and ice making board fails
F6
The initialization of refrigerating ice maker fails
E0
The initialization of freezing ice maker fails
E1
The temperature sensor in the refrigerating chamber fails
E2
The temperature sensor in the freezing chamber fails
E3
The sensor of the Flex Drawer fails
E4
Frosting sensor for refrigerating fails
E5
Frosting sensor for freezing fails
E6
The communication between display board and main control board fails
E7
The ambient temperature fails
OPERATION
OPERATION
DISPENSING WATER AND ICE
The ice/water dispenser is located on the outside of refrigerating chamber door.
It offers a choice of cubed or crushed ice, or cold water. The dispenser only works
when the refrigerating chamber door is closed.
DISPENSING COLD WATER
3.3 Fetching water and Ice
The ice/water dispenser is located on the outside of refrigerating chamber door. It offers a choice of cubed or
crushed ice, or cold water. The dispenser only works when the refrigerating chamber door is closed.
The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor
19
1) Fetching cold water
2 Fetching crushed ice
）
.
a Keep pressing the buttons WATER until the indicator turns on.
b Push the container in the direction of fetching water cushion Cold water starts to flow into the container.
Remove the container from fetching water cushion and end the exporting of water.
Keep pressing the buttons of CRUSHED until the signal turns up.
Make the container tight with mouth of water dispenser to prevent the side jet.
Press the container in the direction of fetching water cushion . Fill the container with crushed ice.
Remove the container from fetching water cushion and end the exporting of water.
3) Fetching ice cubes
Keep pressing the buttons CUBED until the signal lights up.
Push the container in the direction of fetching water cushion.
Ice cubes start to fall into the container.
Remove the container from fetching water cushion and end the exporting of ice.
1. Press the
WATER
button until the indicator light is illuminated.
2. Push the container in the direction of dispensing water cushion until cold water
starts to flow into the container. Remove the container from dispensing water
cushion and end the exporting of water.
DISPENSING CRUSHED ICE
3.3 Fetching water and Ice
The ice/water dispenser is located on the outside of refrigerating chamber door. It offers a choice of cubed or
crushed ice, or cold water. The dispenser only works when the refrigerating chamber door is closed.
The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor
19
1) Fetching cold water
2 Fetching crushed ice
）
.
a Keep pressing the buttons WATER until the indicator turns on.
b Push the container in the direction of fetching water cushion Cold water starts to flow into the container.
Remove the container from fetching water cushion and end the exporting of water.
Keep pressing the buttons of CRUSHED until the signal turns up.
Make the container tight with mouth of water dispenser to prevent the side jet.
Press the container in the direction of fetching water cushion . Fill the container with crushed ice.
Remove the container from fetching water cushion and end the exporting of water.
3) Fetching ice cubes
Keep pressing the buttons CUBED until the signal lights up.
Push the container in the direction of fetching water cushion.
Ice cubes start to fall into the container.
Remove the container from fetching water cushion and end the exporting of ice.
1. Press the
CRUSHED
button until the indicator light is illuminated.
2. Make the container tight with mouth of water dispenser to prevent ice from
falling to the sides.
3. Press the container in the direction of dispensing water cushion. Fill the container
with crushed ice. Remove the container from dispensing water cushion and end
the exporting crushed ice.
