CANFDNET-200U
High-Performance Dual-Channel Ethernet to CAN (FD) Converter User Manual
©2021 Guangzhou ZLG Electronics Co., Ltd.
19
User Manual
6. Other Functions
6.1 Resetting the Device
There are two ways to reset the device: key reset and software reset.
The button is reset after the user presses the device button and releases it. The button should be held for
less than 2s.
After searching for the device, right-click the device, select [Reset] on the pop-up interface, and enter the
password to complete the reset, as shown in the red box in Figure 6.1. After the device is reset, search again to
view the device.
Figure 6.1 Device function display in the network configuration tool
6.2 Restoring Factory Settings
There are two ways to restore factory settings: key and software
After pressing the button for 5 seconds, release the button to restore factory settings.
After the device is searched, right-click the device, select [Restore Factory Settings] on the pop-up interface,
enter the password, and complete the factory restoration, as shown in the red box in Figure 6.1. Search again to
view the device.
6.3 Upgrading the Device
There are two ways to upgrade the device: press the button to enter the upgrade mode and upgrade the
firmware by using the software.
To press the button to enter the upgrade mode: power off the device, press and hold the button to power on
until the SYS indicator blinks slowly, and release the button. The upgrade method is consistent with the direct
software upgrade.
