ZLG CANET-8E-U Скачать руководство пользователя страница 39

Страница: 39 / 53

CANFDNET-400U

High-Performance Four-Channel CANFD Bus-to-Ethernet Converter User Manual

User Manual

Continued

Categ

ory

Name

Default

Description

CAN

port

config

uratio

CAN_AF

Disabled

CAN interface acceptance filter enabling After enabling,

enter the upper and lower limits of the standard frame

ID and the upper and lower limits of the extended frame

ID to be received in the following four items.

Upper limit of

the standard

frame

7FF

（

HEX

）

After CAN_AF is enabled, the upper and lower limits of

the receiving standard frame ID set by the user together

determine the range of the standard frame ID to be

received.

Lower limit of

the standard

frame

000

（

HEX

）

Upper limit of

the extended

frame

1FFFFFFF

（

HEX

）

After CAN_AF is enabled, the upper and lower limit

values of the received extended frame ID set by the

user together determine the range of the extended

frame ID to be received.

Lower limit of

the extended

frame

000000000

（

HEX

）

CAN send

buffer number

(10 frames)

65535

CAN interface transmit buffer size. The default value is

65535x10 frames. You can set the buffer size to adjust

the balance between the real-time performance of the

CAN port and the large-capacity buffer.

Because the speed of Ethernet is much higher than the

transmission speed of CAN, the CAN needs to buffer

transmission if the amount of data received by the

Ethernet is too large. This ensures that no frames are

dropped, but such a large buffer may lead to poor

real-time performance. That is, the data currently sent

by the Ethernet needs to wait for a certain period of time

to be sent out from the CAN interface.

In this case,

either the client controls the transmission speed of the

Ethernet to match the transmission speed of the CAN

port; or the buffer is changed to a smaller size and the

frame is dropped appropriately to ensure real-time

performance.

CAN transmit

buffer policy

Discard new

data when

buffer is full

Policy when the CAN interface transmit buffer is full:

Discard new data when the buffer is full and discard old

data when the buffer is full

Содержание CANET-8E-U






















































Результаты поиска

Содержание CANET-8E-U

Отзывы:

Похожие инструкции для CANET-8E-U

Бренды по названию

Популярные бренды

ZLG CANET-8E-U, Руководство пользователя

Результаты поиска

Содержание CANET-8E-U

Отзывы:

Похожие инструкции для CANET-8E-U

Бренды по названию

Популярные бренды