SBTL300 Series
User Manual
P a g e
| 7
2
Installation of the Product
Installation Notes
1)
It is recommended that the swing barrier must be installed on a horizontal solid platform with a
height of 50mm to 100mm.
2)
It is also recommended that the swing barrier turnstile should not be used in corrosive
environment.
3)
Make sure the protective ground wire of the system is reliably connected to avoid personal
injuries or other accidents.
4)
After installation, check if the connection is done correctly at the connecting points of the
protective ground wire, at the connector assemblies and wiring points of the circuits, as well as
at each movable part of the swing barrier turnstile. Any loose nuts, screws and other fasteners
should be tightened in time to avoid swing barrier turnstile failures caused by longer operations.
Installation Position of the Swing Barrier
A distance of 100mm between the swing barrier turnstile and the wall needs to be reserved for ease
of opening the top cover of the machine to perform maintenance and adjustment. The reference
figure is shown below:
Figure 2-1 SBTL300 series dual-lane
