ProlD Series Water Resistant RFID Access Control Reader
User Manual
P a g e
|
15
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
3.2
Mounting on the wall through Asian gang box
Step 1:
Install the Asian gang box (or single gang box, mullion mount) into the wall.
Step 2:
Fix the back plate onto the Asian gang box (or single gang box, mullion mount) using two wall
mounting screws.
Step 3:
Pass the cables through the wire hole.
Step 4:
Then insert the device into back plate.
Step 5:
Use security screw to fasten the device to the back plate.
Figure 3-2
Install the ProlD series reader on the wall through Asian gang box
Note:
The installation method of single gang box is the same as that of Asian gang box. Only Asian gang box
installation method is illustrated as an example in this quick start guide.
