ProlD Series Water Resistant RFID Access Control Reader
User Manual
P a g e
|
12
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
2.2.2.2
Connect the controller via Wiegand
Figure 2-4
Reader connect the controller via Wiegand
Notes:
When terminal WG26/34 is connected to ground, the number of Wiegand output bits is 26 bits. The default is
not grounded, and the number of Wiegand output bits is 34 bits.
2.2.3
Access Control Device Connection
This ProlD series reader can be connected to an access control device. The wiring below is an example
of connection to an access control device via RS-485.
Figure 2-5
Reader connect the access control device
