ZKTeco FaceKiosk-H10A, Быстрый старт

Страница: 6 / 17

5
Align the rear hanging plate with the wall and the installation holes and attach the rear
hanging plate with four tapping screws. 5.
Pull the network cable and power cable out of the rear hanging board from the cable
outlet and connect them into the device. Then align the device to the wall hanging holes
with the hooks on the rear hanging plate and hang it on the rear hanging plate
.
6.
After aligning the bottom hook screw, insert and tighten the hook screw. Then connect the
power cable into the power strip and turn on the device. 7.