BioSense Series Network Video Recorder User Manual
P a g e
| 68
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
11.2.
Advanced Setting
The Advanced Setting interface, as shown in Figure 11.2.
Figure 11.2 Advanced Setting
11.2.1.
Enable PPPoE
Need to fill in the correct PPPoE user name and password, if the network connect, can obtain the dynamic
address of the device.
11.2.2.
Enable UPnP
Defaulted RTSP, RTMP, HTTP, HTTPS and ONVIF port numbers are respectively 554, 1935, 80, 8081 and
8082, port numbers can be modified (modifying the internal port need to restart the device to take effect),
UPnP status is defaulted to ineffective state, it will obtain the external IP address after take effect.
11.2.3.
DDNS Setting
The default is "disable DNS" status, each set column can not be set, it needs to switch to the "enable DNS"
status, as shown in Figure 11.3, note that, this function need to ensure that device can normal access
network when using.
•
DDNS Type:
there are 5 types of the defaulted list.
•
Server Address:
Each server type is corresponding to the existing default server domain name.
•
Port:
Each server type is corresponding to the existing default port.
•
The User Name and Password:
Manually enter the correct user name and password.
•
Domain:
Manually enter the correct domain name (After the function is OK, you can use the domain
name remote access device).
