BioSense Series Network Video Recorder User Manual
P a g e
| 65
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
10.6.
Device Parameter
The Device Parameter interface, as shown in Figure 10.8.
Figure 10.8 Device Setting
•
Device ID:
Namely device number, default to 0.
•
Device name:
Can edit the device name, default to blank.
•
Product Serial No:
Show the product serial number.
•
Total Channels:
Show the max preview channel number, different model support different max
channels.
•
HDD Number:
Show the number of hard disk access.
•
Alarm Input NO.:
Namely the alarm input channel.
•
Alarm Output NO.:
Namely alarm output channels.
•
Language Select:
Can modify the system language of NVR, need to restart to take effect.
•
Resolution:
Can modify the local monitor resolution of NVR (need monitor support), it come into
effect immediately after modified.
•
Preview ability:
Preview max same screen display channels the device supported and the max
intelligent detection channel numbers (different models of NVR, different ability), need to restart to
take effect.
•
Info Display:
There are 4 kinds of display mode, the preview interface device list refresh in time after
modify successfully.
•
Instant Playback:
There are 5 kinds of time choice, it come into effect immediately after modified.
•
RS485 Device:
Set the 485 control mode, default to None.
•
IPC Protocol:
Selective to enable the protocol, click
Setting
button, as shown in Figure 10.9.
