zkivision ZKIP3 Series, Руководство пользователя

Страница: 16 / 24

User’s Manual for ZKIP3 Series Standard Box IP Camera V1.7
12

I nstallation
1. Put the self-supply lens on the installation seat of lens, and tighten the installation seat of
lens onto the camera.
2. Use 4 screws to fix the base on the top or bottom of the camera, according to different
installation modes.
3. Put the self-supply protective cover or bracket on the camera, and fix it to
complete the installation.
2.2 Network Connection
The device can be connected to network in two ways. The first way is to connect to
the network by means of Ethernet cable, and the second way is to connect to
wireless network (optional).

.............................. Connect by Ethernet Cable
(1) Use Ethernet cables to connect the device to network or directly to computer.
(2) Connect the power supply of the device.
(3) During normal connection, if it is a 10M network, the orange lamp is always
on; if it is a 100M network, the green lamp is also on. The physical connection
with network is completed after the lamp shining.
(4) In the “Start” menu, select “Programs”--“Accessories”--“Command Prompt”,
and input the ping command to the device address (e.g.: type in “ping
Installation
seat of lens
Base