ZKaccess SmartLPR Access, Руководство по установке

Страница: 40 / 65

S
martLPR ® Access User Manual Configuration
Quercus Technologies 41
●
OSD:
●
Main options: Parameters that configure the information to be overprinted as text
straight on the image.
●
Active: sets the OSD system active or not.
●
Position: image position where the text should be displayed.
●
Labels: information on each OSD line. By default, the date and license plate of the
image recognized appear. To change or add more information, check
6.3. OSD
section.
●
DATE & TIME SETTINGS:
●
Configure date and time: configures the automatic synchronization of the hour with
an external server.
●
Time protocol: protocol used in date and time synchronization. Its possible
values are “TIME” and “NTP”. If set to “TIME”, the protocol used will be the one
specified in “ARPA Internet RFC 868” document; if set to “NTP”, the protocol used
will be Network Time Protocol.
●
Time server: date and time server that will synchronize the unit once a day.
●
TimeZone: time zone of the computer. Useful to make sure that the date and
time synchronization takes into account time zone differences. The possible values
are the ones in zoneinfo data base (http://www.iana.org/time-zones).