3
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а
1b
1c
3
2
Folding Hook
13
SAFETY WARNINGS!
• WARNING: Your child’s safety is your responsibility.
• WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric
bar fires, gas fires, etc. in the near vicinity of the cot.
• WARNING: Do not use the cot if any part is broken, torn or missing and use only spare parts
approved by manufacturer.
• WARNING: Do not leave anything in the cot or place the cot to another product, which could
provide a foothold or present a danger of suffocation, e.g. strings, blind/curtain cords, etc.
• WARNING: Do not use more than one mattress in the cot.
• Do not leave the child unattended in this product. Always keep your child in view.
• Ensure that the product is correctly assembled before use; with the top bar locked straight,
the centre foot firmly on ground and the mattress in position.
• Do not use pillows.
• Do not allow a child to lift the sides on the mattress up.
• Position the product on a level and stable surfaces.
• Keep the product away from trailing cords and fixes.
• This travel cot is designed for convenient limited use, it is not designed to replace a cot on
along tern basis.
• Do not use for more than one child at a time.
• The crib/cradle should be placed on a horizontal floor.
• Young children should not be allowed to play unsupervised in the vicinity of a crib/cradle.
COMPLIANCE WITH STANDARD
EN 1130-1 & EN 1130-2.
EN
