Settings Glossary
12
Bluetooth Enable
Turning this off will disable the Jamstik's Bluetooth radio. It is not recommended and
disables wireless connection for the Jamstik. It may be useful for specific, rare studio
scenarios in which a Bluetooth radio could cause interference.
Left-Handed Mode
This sets your Jamstik to left-handed mode and switches the fretboard display in
Jamstik apps. If you purchased a left-handed model, this should be enabled by
default. If it is not, you can turn it on with this option. If you bought a non-left-handed
guitar and you want to use it left-handed, turn this option on and follow the steps at
jamstik.com/start to restring your guitar to match left-handed patterns.
Transcription Mode
Transcription mode improves accuracy and filters out unwanted MIDI notes at the
cost of adding 30-40 extra milliseconds of latency and disabling some performance
features like hammer-ons. This mode is primarily meant for recording rather than
performing and a lower buffer size and ASIO drivers on Windows is strongly recom-
mended in this mode.
Demo Mode
Demo mode is a feature designed for exhibition use that resets a Jamstik's settings
after a period of inactivity. You can change the amount of time between resets and
whether it changes back to a single channel or MPE mode.
Reset to Factory Settings
This option will reset all settings on your Jamstik to factory defaults and reset the
Jamstik. If you are having issues with your Jamstik this may be a solution. If you
cannot access this setting and your Jamstik will not turn on or operate properly,
instead hold the power button for 75 seconds and the Jamstik will force restore.
