Instructions Manual for 5EVM-D Models
M5EVMD2011I
5EVM-D: Electric Vehicle Home AC Charging Station
© ZIV APLICACIONES Y TECNOLOGÍA, S.L.U. 2020
2
2.
Technical Data
The power supply line from the distribution box to the charging point must
comply with electrical safety standards, according to the regulations of each
country.
Remember that the equipment is Cat II (Overvoltage Category). Depending on
the location, it may be necessary to install an external overvoltage protection to
the device.
AC Power Supply
230 V 50 Hz
(±10%)
Single-Phase or Three-Phase.
Overvoltage Category
Cat III
.
Output Maximum Power
Three-Phase
22 kW
Single-Phase
7.4 kW
Consumption on standby
Three-Phase
<1.5 W
/ per phase (@230V)
Single-Phase
<1.5 W
(@230V)
Maximum Output Current
32 A
per phase / plug.
Insulation Class
Class 1
.
Charging System
Mode 3
.
Connection to Power Supply
Permanent
.
Protection Level
IP 54
/
IK 08
Installation Mode
Wall-mounted
3 fixing points
HMI
Display
22 x 70 mm
4
push-bottoms.
2
Status LEDs.
1
Energy Pulses LED.
