Zirkon zahn ZIRCONFEN 600, Руководство оператора и по техническому обслуживанию, Страница: 9 / 40

09 09
PICTOGRAMS ON THE ZIRKONOFEN 600 & 600/V2 SINTERING FURNACES
The symbols (indications) listed below are attached to the device and serve to indicate uncertain
and dangerous situations. The symbols have to be kept clean and to be immediately exchanged, if
they detach or if they are damaged.
Please read this Operator’s and Maintenance Manual very carefully
DGHQTGWUKPIVJGFGXKEGHQTVJGſTUVVKOG
Pay attention to hot surfaces when opening or touching the furnace.
If symbols or pictograms (hazard and behaviour information) on the device are not recognizable
anymore or if they came off, the operator has to replace them immediately.
CHECKLIST OF COMPONENTS – STANDARD VERSION
Packaging list – Equipment:
Zirkonofen 600 or 600/V2 sintering furnace
Firing tray
Power cable
+HQPGQHVJGEQORQPGPVUURGEKſGFCDQXGKUPQVEQPVCKPGFKPVJGUWRRN[KOOGFKCVGN[EQPVCEV[QWT
Zirkonzahn partner.