Zirkon zahn titanium spectral-colouring anodizer, Руководство оператора и по техническому обслуживанию

Страница: 26 / 44

26 26 KAPITEL 7
CLEANING AND MAINTENANCE
CLEANING INSTRUCTIONS
Incorrect cleaning or failure to follow cleaning instructions might damage single
components or seriously endanger operators!
Maintenance work must only be executed by well-trained personnel. Personal safety equipment is
required!
MAINTENANCE AND CONTROL
Regular controls
Before commencing any operation with this device, the following controls must be
executed in this order:
- Visual inspection of mechanical components.
- Visual inspection of electronic components.
- Functional check of electronic components.
- Functional check of mechanical components.
- Visual inspection of the equipment's interior for possible damages or impurity.
If after inspection defects are detected, the device must not be used. The device must be shut down
and secured against unauthorised access. For troubleshooting consult Zirkonzahn (phone +39 0474
066 630) or the contacts specified in your maintenance contract.
Once a week
- Disposal of the used solution and replacement with a new one.