Zipsnip RC2602, Руководство пользователя

Страница: 6 / 24

Heavy-Duty, Self-SHaRpening CoRDleSS CutteR eng
6
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
h) use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by hand or against your body
leaves it unstable and may lead to loss of control.
5. BatteRy tool uSe anD CaRe
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
6. SeRviCe
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
aDDitional Safety RuleS foR
youR tool
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tools may contact hidden wiring. Contact with a
“live” wire will make exposed metal parts of the tool
“live” and shock the operator.
2. use clamps or other practical way to secure
and support the workpiece to a stable platform.
Holding the work by hand or against your body is
unstable and may lead to loss of control.
3. Battery tools are always in an operative
condition. Be aware of the possible hazards.
4. always wear safety goggles or eye protection
when using this tool.
5. Do not run the tool while carrying it at your side.
A spinning blade could become entangled with
clothing and injury may result.
6. Do not cut material greater than the rated
capacity of the cutter. Cutting material greater than
the capacity of the cutter may
cause damage to the cutting edges of the cutter.
7. During a cut, don’t remove cutter from work while
rotary cutters are moving. Removing the cutter
while running may cause damage to the cutters.
8. Do not use dull or damaged cutters or
accessories not intended for this cutter. Replace
worn cutters. Sharp cutters minimize stalling.
9. When cutting, never place your hand in the path of
the blade. The blade is sharp and can lacerate skin
easily.
warnings for the charger:
1. Before using the tool, read the instruction book
carefully.
2. Charger is for indoor use only. Do not expose to rain
or water.
3. Do not charge non-rechargeable batteries.
4. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
someone borrows this tool, make sure they have these
instructions.
WARNING! Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known
to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
1) lead from lead-based paint
2) crystalline silica from bricks and cement and other
masonry products
3) arsenic and chromium from chemically-treated
lumber
Your risk to these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemicals:
1) work in a well ventilated area
2) work with approved safety equipment, such as