Zipper Mowers ZI-HS18EZ, Руководство по эксплуатации

Страница: 44 / 57

Hydraulická štípačka / Hydraulic log splitters ZI-HS13E/ZI-HS18EZ/ZI-HS25Z / ZI-HS25EZ Strana 44
REPLACING OIL
The hydraulic system is a closed system with
oil tank, oil pump and control valve. Low oil
levels can damage the oil pump. Check oil
level regularly with dipstick. The oil should be
completely changed once a year.
Following hydraulic oils or equivalent are rec-
ommend for the log splitter’s hydraulic trans-
mission system:
 SHELL Tellus 22
 MOBIL DTE 11
 ARAL Vitam GF 22
 BP Energol HLP-HM 22
Make sure moving parts stop and the log split-
ter is unplugged and PTO driveshaft is discon-
nected. Use a drain pan to aid in the removal
of all used oil and particles. Remove oil drain
plug to drain oil from the hydraulic transmis-
sion system. Examine oil for metal chips as a
precaution to future problems. After oil has
been completely drained from the machine,
reinstall drain plug. Add the hydraulic trans-
mission system with recommended oil
through filler plug opening.
Read dipstick to determine the
maximum and minimum of the
oil level. Low oil can damage
the oil pump. Overfilling can re-
sult in excessive temperature in
the hydraulic transmission sys-
tem.
Apply sealant to filler plug and reinstall it. Fol-
lowing an oil change, activate the log splitter
a few times without actually splitting.
SHARPENING WEDGE
This log splitter is equipped with reinforced
splitting wedge which blade is specially
treated. After long periods of operation, and
when required, sharpen the wedge using a
fine-toothed file removing any burrs or flat
spots on the edge.