Zipper Mowers 912003923904 0, Руководство пользователя

Страница: 27 / 45

SAFETY
ZIPPER MASCHINEN GmbH  www.zipper-maschinen.at Seite 27
Motorsense / brush cutter ZI-MOS145G Seite 27
13 SAFETY
13.1 Intended Use
The ZIPPER garden maintenance set ZI-GPS170G shall only be used for mowing and trimming
grass at moderate and non-slippery terrain and for cutting twigs and hedges.
W A R N I N G
Do not change the mowing attachment.
Using saw blades for the machine is prohibited!
Damaged cutting tools may be not straightened or welded in no case!
HIGHEST RISK OF INJURY!
ZIPPER MASCHINEN cannot be held responsible for any injuries or damages if there was per-
formed manipulation or adjustments to the machine.
13.2 Security instructions
Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and lim-
it the use of this machine!
Use the machine only in good enough light to allow a safe opera-
tion can be guaranteed.
In tiredness, decreased concentration or under the influence of
alcohol or drugs, the work on the machine is prohibited!
Caution in slippery conditions - slip hazard - risk of injury. When
working, robust and non-slip footwear. Slides / stumble / traps are
a major cause of serious injury or death.
The machine may only be operated by trained personnel.
Unauthorized persons, especially children and not trained person-
nel must be kept away from the running machine!
If you pass the machine to third, these instructions must be at-
tached to the machine.
Before each use, the reliability of the machine is to be checked
(tightness of the cutting tool, the proper function of the throttle
lever)
Danger of burns! During the operation flow of hot exhaust gases
and engine parts such as the carburettor and engine become hot.
Never place a hot brush cutter in dry grass or other easily flamma-
ble materials.
After the operation, the machine must cool down. Otherwise there
is an imminent risk of burns