OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
23
ZI-ASA550E
14.2
Connection of dust collector to machine
Dust collector plug: Ø 100mm
Ensure dust collector tubes to be composed of hardly inflammable material and antistatic.
The total distance between dust collector hood and machine dust collector hood shall not exceed
10 meters.
14.3
Switch unit
On-off-switch:
Press green button (I): turn on
Press red button (0): turn off
14.4
Switching on
Check that extractor hose (6) is attached firmly to the adapter of both vacuum extractor
and woodworking machine.
Check if dust collecting bags (7/8) are tightened well.
Start the dust collector by pressing the green button "I".
Now you can start the woodworking machine.
14.5
Switching off
Switch off the woodworking machine
Switch off the woodworking machine by pressing the red button,,0" or by pressing the
Emergency button (17).
14.6
Emptying the debris bags
The debris collector bag (7) shall be controlled on a regularly basis and emptied if necessary.
Empty bags when they are approximately 2/3 full.
Attention: Disconnect from power supply!
Shake the dust bag. Let the dust settle down for 5 minutes.
Grap collector bag with left hand.
Release the quick clamp (9)
Take the bag and dispose the content meeting environmental standards.
Fix the empty bag onto the holding device and fix it with the quick clamp (9).
